|
|
|
Volume No 11 - Supplement 1- April
2006
Abstracts of the 16th Interdisciplinary Research Conference
on Biomaterials
March 16th - 18th, 2006, Bern, Switzerland,
Abstracts listed in order of presentation at the meeting
Clinical Applications and Experiences
Page 1: S Becker, K Franz,
I Wilke, M Ogon
Injectable bone cements in the treatment of spinal fractures, osteopromotive
capacity and surgical considerations
Page 2: C Schwartz, S Malincenco,
R Bordei
The use of a nanoparticles hydroxylapatite gel as a bone substitute
Page 3: T Slongo, A Joeris
ChronOSTM Inject in children with bone cysts resistant to conventional
treatment
Page 4: P Chelius
Three years of use of a tri-calcium phosphate (ß) substitute
in bone and joint surgery
Material Synthesis and Characterization
Page 5: H Spengler, L
Hermansson, H Engqvist
Evaluation of the cohesiveness of injectable Ca-aluminate based
materials in water and simulated body fluid during curing
Page 6: T Brunner, S Loher,
WJ Stark
Fluoro-apatite and calcium phosphate nanoparticles by flame synthesis
Page 7: WJEM Habraken, JGC
Wolke, AG Mikos, JA Jansen
Injectable PLGA microsphere / calcium phosphate cements: Physical
properties and degradation characteristics
Page 8: C Combes, C Rey
Calcium carbonate biphasic cement concept to control cement resorption
Page 9: G Romieu, S Munier,
H Garreau, M Vert, P Boudeville
A new injectable calcium-strontium phosphate bone cement and PLAGA
composite
Page 10: O Zamoum, O Mecherri,
M Fiallo, P Sharrock
Anisotropic bone scaffolds
Page 11: P Kasten, J Vogel,
R Luginbühl, I Beyen, M Bohner, B Gasser, W Richter
Influence of platelet-rich plasma on osteogenic differentiation
of mesenchymal stem cells and ectopic bone formation in calcium
phosphate ceramics
Page 12: K Sun, E Mendel,
L Rhines, A Burton, M Liebschner
Disperse cement filling in vertebroplasty may reduce risk of secondary
tissue damage
Drug Delivery Applications
Page 13: TT Tang, HF Ding,
R Liu, BG Li, CF Yu, JR Lou, KR Dai
In vitro study of BMP-2 gene transfected bone marrow derived
mesenchymal stem cells in APA microcapsules
Page 14: J-Y Hong, S-J Hong,
S-W Jung, Y-J Um, S-B Lee, K-S Cho, C-S Kim
Fibrin-fibronectin sealing system in combination with beta-tricalcium
phosphate as a carrier for recombinant human bone morphogenetic
protein-2: Effects on bone formation in rat calvarial defects
Page 15: TR Blattert, W
Schmölz, A Weckbach, C Toth, L Claes, H-J Wilke
An injectable composite of osteogenic protein-1 (OP-1, rhBMP-7)
and hydroxyapatite enables early in vivo cement stabilization and
biointegration. A controlled, randomized study in the sheep spine.
Page 16: S Girod, H Ternet,
M Frèche, JL Lacout, F Rodriguez
Mineral / organic composite bone grafts: Characterization and evaluation
as drug delivery systems
Clinical Experiences
Page 17: G Maestretti, C
Cremer, Ph Otten
Three years experience with standolone kyphoplasty and calcium phosphate
cement in traumatic fractures
Page 18: TR Blattert
Limited suitability of calcium phosphate in the treatment of osteoporotic
vertebral body fractures
In Vivo Studies
Page 19: A Bignon, E Viguier,
F Laurent, D Goehrig, G Boivin, J Chevalier
A new concept of antibiotic loaded HAP/TCP bone subsitute for prophylactic
action: ATANTIK Genta - In vivo study
Page 20: Q Li, C Zhou
A poly (D, L-Lactide) / allogenic bone composite for bone tissue
engineering
Page 21: KR Dai, M Yan,
TT Tang
Enhanced osseointegration of bone-implant interface by BMP-2 gene
medication
Page 22: Y-J Um, D-S Song,
J-Y Hong, S-W Jung, S-B Lee, K-S Cho, C-S Kim
Effects of recombinant human bone morphogenetic protein-2 and acellular
dermal matrix on bone formation in rat calvarial defects
Page 23: K Poret, M Frèche,
S Goncalvez, JL Lacout, F Rodriguez
Chitosan containing calcium phosphate cement: preparation and clinical
study
Page 24: U Berlemann, O
Schwarzenbach, C Etter, S Kitchell
Clinical evaluation of an injectable, in-situ curing nucleus replacement
Page 25: M Rouahi, E Champion,
P Hardouin, K Anselme
Quantitative kinetic analysis of gene expression during human osteoblastic
adhesion on orthopaedic materials
Biomechanics
Page 26: D Boyd, MR Towler
The effect of strontium on the rheology and mechanical properties
of zinc based glass polyalkenoate cements
Page 27: A Marsano, D Wendt,
R Raiteri, R Gottardi, S Dickinson, AP Hollander, D Wirz, AU Daniels,
TM Quinn, M Stolz, I Martin
Local compressive and tensile stiffness measured in tissues with
regular patterns of hyaline-fibrocartilage regions
Page 28: J Schwardt, T Slater,
S Lee, J Meyer, R Wenz
KyphOs FS™ calcium phosphate for balloon kyphoplasty: Verification
of Compressive Strength and Instructions for Use
Page 29: A Boger, P Heini,
M Bohner, E Schneider
Vertebral cancellous bone augmented with stiffness-adapted PMMA
cement does not show acute failure under dynamic loading
Page 30: PJ Leamy, M Lehmicke,
MT Fulmer
Effect of solution viscosity on cement injectability
POSTERS
Page 31: S Becker, I Boecken,
M Bohner, G Bigolin, M Alini
Activation and biomechanical assessment of an injectable hybrid
osteoconductive - osteogenic bone substitute
Page 32: LM Benneker, A
Gisep
The effect of pulsed jet lavage in vertebroplasty on injection forces
of PMMA bone cement, material distribution and potential fat embolism:
A cadaver study
Page 33: D Bludovsky, M
Choc
Biodegradable polymers in spinal surgery - posterior lumbar interbody
fusion with resorbable polymer interbody cage. Case report
Page 34: S Bandyopadhyay-Ghosh,
A Johnson, IM Reaney, K Hurrell-Gillingham, IM Brook, PV Hatton
Fluorcanasite / frankamenite based glass-ceramics for bone tissue
repair
Page 35: CL Burchfield,
AE Tate, S Jalota, SB Bhaduri, AC Tas
Synthesis and in vitro cell culture of Zn-doped calcium phosphates
Page 36: S Desmons, C Delfosse,
P Rochon, G Leroy, S Mordon, G Penel
Laser preconditioning on irradiated bone: A preliminary intravital
study
Page 37: M Geiger, A Hina,
S Sofia, N Warne
Using XRD, FTIR and TG analysis to monitor conversion of a novel,
injectable calcium phosphate cement
Page 38: F Goetz-Neunhoeffer,
J Neubauer, M Göbbels, R Enderle
Effect of Mg2+ content on lattice parameter and phase transformation
temperature of ß-a TCP
Page 39: A Gorustovich,
M Sivak, MB Guglielmotti
A novel experimental approach to imaging and quantifying newly bone
formation around bone substitutes
Page 40: L Hermansson, A
Faris, H Engqvist
Evaluation of in vitro bioactivity of different types of
biomaterials
Page 41: PA Hulme, J Krebs,
SJ Ferguson, U Berlemann
Vertebroplasty and kyphoplasty: A systematic review of 69 clinical
studies
Page 42: PA Hulme, PF Heini,
T Persson, H Spengler, K Björklund, L Hermansson, SJ Ferguson
Mechanical evaluation of a bioactive calcium aluminate cement for
vertebral body augmentation
Page 43: V Jack, F Buchanan,
N Dunne, M Bohner
Comparison of milling techniques in the production of alpha-TCP
Page 44: S-S Kim, MS Park,
O Jeon, CY Choi, B-S Kim
Poly(lactide-co-glycolide)/nano-hydrowyapatite composite for bone
regeneration
Page 45: J Krebs, SJ Ferguson,
BG Goss, N Aebli
Effects of vertebral bone augmentation on intervertebral discs
Page 46: J Krebs, N Aebli,
BG Goss, S Sugiyama, SJ Ferguson
Cardiovascular consequences of pulmonary cement embolism
Page 47: BT Lee, AK Gain,
HY Song
Fabrication of porous AL2O3 and T-ZRO2 ceramics and evaluation of
their biocompatibility
Page 48: L Lefebvre, J Chevalier,
D Bernache, L Gremillard, R Zenati
Phases evolution of bioactive glasses during crystallization for
orthopaedic and tissue engineering applications
Page 49: P Lei, XE Xing
The study of PLGA/TCP scaffold with bovine BMP were implanted in
bone defects peri-implant
Page 50: P Lei, W Mingxi,
XE Xing
Autologous marrow stromal cells enhance further osseointegration
earlier in porous coated-apatite titanium implants in rabbit
Page 51: M Loeffel, J Kowal,
PF Heini, J Burger, L-P Nolte
Development of an advanced injection device for highly viscous materials
Page 52: J Luyten, S Mullens,
I Thijs, J Cooymans, S Impens
Bone substitutes produced by wet shaping techniques
Page 53: L Obert, G Leclerc,
D Lepage, Y Tropet, P Garbuio
Distal radius fracture and injectable cement : useful or not?
Prospective continue study of 48 cases with minimal follow up of
3 years
Page 54: L Obert, D Lepage,
J Pauchot, Y Tropet, P Garbuio
Post traumatic arthritis secondary to intra articular malunion of
distal radius treated by chondro costal graft
Page 55: L Obert, D Lepage,
S Rochet, Y Tropet, P Garbuio
Extra articular malunion of the distal radius treated by corrective
osteotomie and injectable cement
Page 56: HK Park, JH Park,
HD Han, JH Chung
Impact simulation for cranioplasty using a non-linear finite element
model
Page 57: HH Park, KE Park,
KY Lee, WH Park
Preparation and characterization of nanofiber matrices for tissue
engineering
Page 58: HY Song, KK Ko,
IH Oh, BT Lee
Fabrication of silver nanoparticles and their antimicrobial mechanisms
Page 59: CM Sprecher, A
Gisep, S Milz, U Haupt, K Yen, P Heini
Morphological changes during 42 months of PMMA vertebroplasty: A
case study
Page 60: EI Suvorova, PA
Buffat
Determination of impurities in calcium phosphate ceramics
Page 61: W Tawackoli, K
Sun, M Fukshansky, A Burton, L Rhines, E Mendel, M Liebschner
Acrylic vertebroplasty alters vertebral load distribution and causes
reduction in strength of adjacent vertebrae
Page 62: MD Waites, SC Mears,
JM Mathis, SM Belkoff
Strength restoration by sacroplasty of simulated sacral insufficiency
fractures
Page 63: R Wenz, J Meyer,
M Sankaran, J Schwardt
Chemical- physical characterization and histological outcomes after
implantation of KyphOs™ and KyphOs R™ in vertebral bodies
of sheep
|
